Glass Painting Kits

The glass is so beautiful! Paintings too are the delight of eyes'! When glass and paintings are combined, they create amazing works of art. The art of painting on glass became popular, particularly with those who want to decorate their home with a artistic flair. In fact, it is not very difficult to do. You can create a beautiful painting in one day.

All you have to paint on glass is a little imagination and patience with, of course, some things like a piece of clean glass (Size 8X8 "is enough for first timers), glass liners , paints, brushes, nail polish remover and a soft cloth. You do not have to worry about in the collection of these items. They are all included in the kit paint , which are so readily available on the market these days. Even before buying a glass painting kit, you'll have to decide what colors you will use to make your painting on glass. If you are a programmer first, then you must pick the color based on water and get the kit for beginners. waterborne paints compared to oil-based paints are easier to handle.

Basic steps to make a painting on glass

1. After getting the piece of glass and paint kit, clean the glass to obtain a smooth surface.
2. If you're not going to cure your oven finished painting, you need a bit rough. Bake in an oven can help oil paints dry paint to adhere better otherwise tend to peel or chip off. This can be countered by the roughness of the surface up a bit with sandpaper wet or dry. Roughing the surface in this way help the paint adhere better and last longer.
3. Choose a model that has clearly described with minimal curves and sharp angles as possible.
4. Trace the pattern onto a piece of paper that is exactly the size of the glass piece. The model should be developed exactly in the center with at least 1 or 1-1/2 inch margin on all sides.
5. Keep the glass on the piece of patterned paper to align perfectly.
6. To outline the pattern on the glass using glass coating. Use black glass liner for maximum clarity. These boundaries help in keeping the colors within them moist and avoid spilling paint.
7. In doing all this, do not spoil the pattern. However, if it happens, sampling from the edges with cotton dipped in nail polish remover and wipe with a cloth.
8. Leave the ground to dry up. It may take 2 to 5 hours to get completely dry. It can also be dried or blow to hasten the process.
9. Now, use the colors to complete the model moves uni-directional. Avoid taking too much paint or overthrow. Any corner or a room that is not painted can be seen from the back by lifting the glass. Be careful, do not hold the glass upright to avoid draining the colors.
10. If the bubbles are made in color by painting, then pierce with a needle or a pin. They can also be lightly brushed to outline them out of the corn borer and then wipe them with nail polish remover.
11. Avoid applying two coats of paint in any part of the structure.
12. Allow paint to dry for at least 24 hours.
13. After the paint is dry, place in cold oven. Set the oven to 160 deg C (325F). When the temperature reaches 160C, the time of 40 minutes. Turn off the oven and let cool. When the oven is cold, remove the paint on glass.
14. Alternatively, you can let the air as the paint dries Klin not cooking it.
15. You can use beads, GLIT.