Black Enamel Paint

As the days pass, the cars play a vital role in the lives of so many people. Almost every day, they use cars to fulfill their various needs especially in terms of travel. However, upon waking, one day they may find these precious things greatly affected by wear and tear, caused by some underlying factors such as climate change, accidental bumps and scratches. To restore the beauty and the glow of cars, a simple car paint can do the job.

The most important materials to make this simple car painting process are sandpaper, soap and water, and black enamel paint. In addition, a wax stripper or another type of degreaser is also necessary to achieve this result perfect car paint. metal body putty, and varnish the painting also used for specific purposes, and so make a masking tape and a paint primer. Before we begin, a lot of plastic is needed to cover all windows of the car. Finally, a urethane based paint desired color is also essential for this very important final coating.

To facilitate the process of painting a car, some important tools can really help such as garden hose, paint sprayer, and rags. In terms of location, a closed room, like a garage can complete the procedure, which is divided into two phases: the pre-painting and the actual painting.

The pre-painting
1. To prepare a car for some really good painting, it is necessary to clean, remove all dirt, grease and wax in the process. Before starting, all surfaces must be absolutely clean. A garden hose can facilitate the realization of this simple step.

2. For paint to achieve that perfect shine, the surface should be smooth. Use sandpaper to smooth rough areas and remove, scratches and rust.

3. Use the wire to the mass of the car so that the static dust stop attracting more dust.

4. Wipe the dirt, to ensure that the car is completely clean before beginning the painting process.

5. Use plastic to protect windows to get all the paint. An adhesive is sufficient to maintain the plastic in place. For parts of the car that needs no paint, covers both protected from the paint.

6. If there are holes or uneven surfaces, simply apply some putty to smooth out and create a smooth look everywhere.

7. Wait until the dough dries out completely, and prepare for the actual painting stage.

The current phase of painting:
1. After all the preparations, it is now time to actually paint the car by loading the primer into the paint sprayer, then spray the entire surface of the automobile. After use, clean sprayer very well in preparation for the second level of the coating. Wait a while until the surface dried off completely before proceeding to the next step.

2. It is now time to put the second layer by charging the black enamel paint in the sprayer, then spray evenly over entire surface. Clean the sprayer after use again, then wait some time for the paint to dry completely.

3. Use sandpaper to remove any rough areas and the whole coating of black enamel in preparation for the next step.

4. Reload the sprayer once again, this time using the urethane paint the desired color, then spray evenly over entire surface. Wait a while until the paint dries off.

5. When the last coat is already dry, repeat the last step, then clean the sprayer once again.

6. After the second coat of paint dry urethane off, recharge the varnish in the sprayer, then spray the entire surface of the car. Wait a while until the paint dries completely.

7. Repeat the last step twice more.